HOME PRODUCTS LOCATIONS CAREERS CONTACT US
 
Drilling Fluid Additives
 
Cement Additives
 
Completion Fluids
Environmental Products
 
Polymers
 
 
COMPLETION FLUIDS » FRACKING CHEMICALS
ACIDS
GLO ACID Range of acids and acid systems, which includes, but is not limited to different concentrated Hydro Chloric Acid, Hydro Iodic Acid, Acid-Oil Emulsifiers. Environmentally-friendly biodegradable system used as a breakdown acid preceding the fracturing treatment.
BIOCIDES
GLO BIOCIDE Range of biocides based on standard as well as novel chemicals and blends like Gluteraldehyde, DBNPA, THPS, QUATS and Per Oxides. The product selection depends upon factors like microbial loading, reaction time, type of microbes etc. Our systems are used both to control and inhibit microbial growth.
BREAKERS
GLO GEL BREAK Series of gel breakers to work on slick water, linear gel, or crosslinked gels. High-temperature, encapsulated, oxidizing breaker designed as a slow release that allows delayed or increased breaker concentrations and increased break times at temps between 180°-300°F. Typical loadings range from 0.25 to 2.0 ppt, but should be tested to optimize the break schedule.
BRINES
GLO GEL BRINE A series of single as well as multi salt brines and brine systems, mainly Chloride and Bromide Salts of Ammonium, Calcium, Potassium, Sodium and Zinc. These are available in different densities and are available in custom made formulations.
BUFFERS
GLO BUFF Series of buffers to stabilize low to high pH gels and fluids and help polymer in proper hydration in saline / boron contaminated water systems.
CLAY STABILIZERS
GLO CLAY CTRL Range of clay control agents and shale stabilizers offered under the trade names of GLO CHECK, GLO EZ, GLO INHIBITOR, GLO PRIME INHIB, etc.
CORROSION INHIBITORS
GLO COR Series of corrosion inhibitors specifically designed to prevent well corrosion during flow-back after treatment. A series of water soluble/oil dispersible corrosion inhibitors for wells with high water cut. Formulations are available for high velocity, high CO2, sour, and oxygen contaminated applications. Depending on application, the chemistry may be based upon Imidazoline, QUAT or novel molecules.
CROSS LINKERS
GLO CROSS A series of cross linkers based on Borax or other proprietary metals to cross link regular guar, HPG, or CMHPG. The crosslinking time can be adjusted by accelerating / delaying the process by adding custom designed additives.
FRICTION REDUCERS
GLO MER Polymer/ co-polymer based friction reducer systems. The polymer can be nonionic, anionic or cationic, high molecular weight, polyacrylamide co-polymer emulsion friction reducers designed for slick-water applications in low pH or acidic treating fluids or higher brine waters containing up to 10,000 ppm hardness ions.
GELLING AGENTS
GLO GUAR Fast-hydrating, high viscosity guar gum powder (4045), easily cross-linked with borate cross-linker systems, and easily broken with conventional breaker systems. Product selection and loading is determined through laboratory testing.
GLO GUAR L Guar gum slurry containing 4.0 ppg 35-40 or 40-45 grade, fast hydrating guar gum dispersed in mineral oil. The hydration rate is expected to achieve 85% in 3-5 min, depending on water temperature and quality.
GLO HPG / CMHPG HPG / CMHPG slurry containing 4.0 ppg high grade HPG / CMHPG dispersed in mineral oil. The hydration rate is expected to achieve 85% in 3-5 min, but may require water pH adjustment to 6.5 to 7.0 in saline water.
GEL STABILIZERS
GLO STABLE GEL A series of custom made gel stabilizers designed to stabilize crosslinked gel from higher temperature, acid, oxygen attacks.
© Global AM-TX, Inc.  All rights reserved.