HOME PRODUCTS LOCATIONS CAREERS CONTACT US
 
Drilling Fluid Additives
 
Cement Additives
 
Completion Fluids
 
Environmental Products
 
Polymers
POLYMERS » POLYMER BASED PRODUCTS
GLO  BIOPOLYMER Xanthan gum biopolymer utilized to provide maximum sheer thinning viscosity in water-based mud systems and production fluids.
GLO BRINE VIS Non-damaging viscosifier for brines.
GLO CMC S

CMC slurry containing 3.5 / 4.0 ppg high grade CMC dispersed in environmentally friendly, non-DOT regulated, no BTEX - refined mineral oil / proprietary similar oil. The hydration rate is expected to achieve 85% in 3-5 min and is more tolerant of colder temperatures.

GLO CMHPG S

CMHPG slurry containing 3.5/4.0 ppg high grade CMHPG dispersed in environmentally friendly, non-DOT regulated, no BTEX - refined mineral oil / proprietary similar oil. The hydration rate is expected to achieve 85% in 3 min, but may require water pH adjustment to 6.5 to 7.0 in saline water.

GLO EZ Liquid polymer additive that quickly mixes into a mud for stabilizing troublesome shale and builds viscosity.
GLO EZ NI A high molecular weight, non-ionic polyacrylamide used as a flocculant to remove low-yield solids from water-based drilling fluids.
GLO EZ P Dry polymeric additive that’s very effective in stabilizing troublesome shale and controls fluid loss. 
GLO FLOC 100 Liquid flocculating agent for water-based mud systems.
GLO GS H

Guar gum slurry containing 3.5 /4.0 ppg, fast hydrating guar gum (4045 grade) dispersed in environmentally friendly, non-DOT regulated, no BTEX - refined mineral oil / proprietary similar oil. The slurry viscosity ranges from 175 to 300 cP at 511 sec-1. The hydration rate is expected to achieve 85% in 3-5 min, depending on water temperature and quality.

GLO GS L

Guar gum slurry containing 3.5 / 4.0 ppg  fast hydrating guar gum (3540 grade) dispersed in environmentally friendly, non-DOT regulated, no BTEX - refined mineral oil / proprietary similar oil. The slurry viscosity ranges from 175 to 300 cP at 511 sec-1. The hydration rate is expected to achieve 85% in 3-5 min, depending on water temperature and quality.

GLO HEC L Liquid viscosifier for polyvalent brines; promotes solid carrying capacity in salt and brine systems.
GLO HPG S HPG slurry containing 3.5/4.0 ppg high grade HPG dispersed in environmentally friendly, non-DOT regulated, no BTEX - refined mineral oil / proprietary similar oil. The hydration rate is expected to achieve 85% in 3-5 min and is more tolerant of more saline waters and colder temperatures.
GLO MER FLC Thermally stable fluid loss control, especially in high water dilution; builds a tough filter cake and is effective in high hardness.
GLO MER LA High molecular weight polymer for stabilizing troublesome shale and providing fluid loss control.
GLO MER LN Liquid polymer to quickly build a viscosity in water-based muds; used in bentonite muds.
GLO MER PN Dry nonionic polymer flocculent for watered based mud systems.
GLO PAC LV Polyanionic cellulose fluid loss control additive: develops little viscosity.
GLO PAC R Polyanionic fluid loss additive for water-based fluids; viscosifier and shale inhibitor.
GLO PHPA Polymer additive for controlling shale formations and providing fluid loss control.
GLO POLY DRILL Polymer utilized in a wide range of drilling fluid systems for high temperature fluid loss control and stabilizes rheology.
GLO POLY DRILL 100 Polymer blend for high temperature fluid loss control or shale control.
GLO POLY LOSS 700 Polymer additive used for fluid loss control and mud stability; very good in low solids systems.
GLO POLY PAC Synthetic polymer additive for high temperature fluid loss control; no effect on rheology.
GLO POLY THIN Co-polymer deflocculant complex; stabilizes rheology of water-based mud systems; effective at elevated temperatures.
GLO POLY THIN L Liquid polymer deflocculant complex; stabilizes rheology of water-based mud systems; effective at high temperatures.
GLO POLY VIS High molecular weight co-polymer viscosifier for non-dispersed water-based muds.
GLO POL S

Other polymer slurries viz. Poly Acryl Amide, PHPA, HEC, etc. Based on our formulation or formulated per customer’s requirement.

GLO THIN HT Chrome-free polymeric complex; high temperature mud thinner and fluid loss control agent.
GLO XAN S High purity Xanthan gum slurry in environmentally friendly, non-DOT regulated, no BTEX - refined mineral oil / proprietary similar oil containing 20% / 30%/ 40% dry Xanthan Gum. Xanthan gelling agent having a higher yield stress used for sweeps, suspension and high salt applications.
GLO-X-TEND 100 Extends the yield of bentonite while flocculating low yield drill solids; allows for fast low solids drilling.
GLO-X-TEND 200 Extends the yield of bentonite while flocculating low yield solids; treats for hardness and allows for fast low solids drilling.
SYNCARB KW High temperature polymeric thinner and deflocculant effectively reducing the yield point.
SYNCARB S Low molecular weight anionic polymeric mud thinner; effective at temperatures in excess of 350*F (177*C).
© Global AM-TX, Inc.  All rights reserved.