HOME PRODUCTS LOCATIONS CAREERS CONTACT US
 
Drilling Fluid Additives
 
Cement Additives
 
Completion Fluids
 
Environmental Products
 
Polymers
 
 
CEMENT ADDITIVES » MUD REMOVALS
Cement Spacers
GEM 1 Emulsifier/water wetting surfactant; used to make oil-in-water (outside phase) emulsion spacer; displaces weighted drilling muds in plug or turbulent flow; can be weighted to 17.0 lb./gal.
GOS 50 Spacer GWS-50 plus water-wetting surfactant, displaces weighted drilling muds in plug or turbulent flow; effective at all temperatures; normal surfactant concentration is 2 to 4 gal/barrel.
GWS 50 Spacer concentration; displaces weighted drilling muds in plug or turbulent flow, effective at all temperatures; weighted with barite, silica, ilmenite, or hematite up to 18.0 lbs/gal; normal concentration is 50 lbs/barrel of mix water.
 
Chemical Washes
GCW 1 Liquid silicate cement/mud pre-flush removes mud by turbulent action and chemical reaction.
GCW 2 SAPP, chemical wash for water-based muds; removes mud by turbulent action and chemical reaction.
GCW 3 Selected chemical wash concentrate; effective at all temperatures, water wetting, normal concentration is 1 gal/barrel mix water.
GCW 3F Selected blend of chemical wash concentrate and oil-soluble fluid-loss additive; removes mud by turbulent action and chemical reaction; components mixed with water on location.
GCW 4 Chemical wash for oil-based drilling muds; removes mud by turbulent action and chemical reaction; extreme wetting ability and effective at all temperatures.
© Global AM-TX, Inc.  All rights reserved.